여러분의 지식탐구 동행자 로봇사이언스몰입니다.
Login Join Cart Order MyPage CS Center
School PayAfter 전문가에게 상품추천받기 결제오류 문의전화번호안내 회원전용 개인결제창 비회원 개인결제창
1vs1Question UserManual AttachedIcon Online Class Biz Partner Join Partner
A/S접수하기 기술문의 견적서 요청하기 할인&이벤트상품 방과후수업 코딩강사매칭

QUICK MENU

최근본상품 0

    prev
    /
    next

    추천상품 0

      prev
      /
      next

      장바구니 0

        prev
        /
        next

        위시리스트 0

          prev
          /
          next

          TOP BOTTOM
          네이버 톡톡  톡톡
           
          • 모터, 서보모터, 스텝모터 드라이버 및 컨트롤러
          • [로봇사이언스몰][Pololu][폴로루] Mini Maestro 18-Channel USB Servo Controller (Partial Kit) #1355
            상품번호 : 12221

            아이콘 설명보기
          • 10%
          • 상품코드 : RS-012221
            * 해외상품 국내보유 재고 : 0 개
            * 재고가 0 또는 수량 부족 시 해외상품배송안내 클릭
            * 국내상품/해외상품 식별방법 보러가기
            판매가
            116,700₩

            할인내역

            구분 할인
            기본할인 10,600₩
            닫기
            106,100(부가세포함)
            무이자할부
            5만원 이상 무이자 자세히보기

            무이자할부

            
															3~12개월 5만원이상
            
															3~12개월 5만원이상
            
															3~12개월 5만원이상
            
															3~12개월 5만원이상
            
															3~12개월 5만원이상
            
															3~12개월 5만원이상
            
															3~12개월 5만원이상
            
															3~12개월 5만원이상
            닫기
            배송
            • 3,500₩ (100,000₩ 이상 무료)
              추가배송비 : 1,000₩~10,000₩ (지역별)
              지역별차등금액적용
              달력
            적립혜택
            1,061₩
            상품정보

            상품정보제공고시

            품명 및 모델명 상세설명참조
            법에 의한 인증,허가 등을 받았음을 확인할수 있는 경우 그에 대한 사항 상세설명참조
            제조국 또는 원산지 상세설명참조
            제조자,수입품의 경우 수입자를 함께 표기 상세설명참조
            AS책임자와 전화번호 또는 소비자상담 관련 전화번호 상세설명참조
            상품위치
            닫기
            고객평가
            0건  ★★★★★ (0/5)
            판매자
            본사
          • 수량
            • 총 상품금액
            • 106,100
          • 위시리스트

          [로봇사이언스몰][Pololu][폴로루] Mini Maestro 18-Channel USB Servo Controller (Partial Kit) #1355


          The 18-channel Mini Maestro 18 raises the performance bar for serial servo controllers with features such as a native USB interface and internal scripting control. Whether you want the best servo control available (0.25μs resolution with built-in speed and acceleration control and pulse rates up to 333 Hz) or a general I/O controller (e.g. to interface with a sensor or ESC via your USB port), this compact, versatile device will deliver. Header pins are included but not soldered into this partial kit version (all surface-mount components are soldered).


          Getting started with the Maestro Servo Controller

          For a full list of products shown in this video, see the blog post.

          Overview

          Maestro family of USB servo controllers: Mini 24, Mini 18, Mini 12, and Micro 6.

          The Mini Maestros are the newest of Pololu’s second-generation USB servo controllers, offering more channels and features than the smaller six-channel Micro Maestro. The Mini Maestros are available in three sizes, and they can be purchased fully assembled or as partial kits:

          The Mini Maestros are highly versatile (and compact) servo controllers and general-purpose I/O boards. They support three control methods: USB for direct connection to a computer, TTL serial for use with embedded systems, and internal scripting for self-contained, host controller-free applications. The channels can be configured as servo outputs for use with radio control (RC) servos or electronic speed controls (ESCs), as digital outputs, or as analog/digital inputs. The extremely precise, high-resolution servo pulses have a jitter of less than 200 ns, making these servo controllers well suited for high-performance applications such as robotics and animatronics, and built-in speed and acceleration control for each channel make it easy to achieve smooth, seamless movements without requiring the control source to constantly compute and stream intermediate position updates to the Mini Maestros. The Mini Maestros also feature configurable pulse rates from 1 to 333 Hz and can generate a wide range of pulses, allowing maximum responsiveness and range from modern servos. Units can be daisy-chained with additional Pololu servo and motor controllers on a single serial line.


          The Status tab in the Maestro Control Center.

          A free configuration and control program is available for Windows and Linux, making it simple to configure and test the device over USB, create sequences of servo movements for animatronics or walking robots, and write, step through, and run scripts stored in the servo controller. The Mini Maestros’ 8 KB of internal script memory allows storage of up to approximately 3000 servo positions that can be automatically played back without any computer or external microcontroller connected.

          Because the Mini Maestros’ channels can also be used as general-purpose digital outputs and analog or digital inputs, they provide an easy way to read sensors and control peripherals directly from a PC over USB, and these channels can be used with the scripting system to enable creation of self-contained animatronic displays that respond to external stimuli and trigger additional events beyond just moving servos.



          The fully assembled versions of the Mini Maestro ship with 0.1″ male header pins installed as shown in the respective product pictures. The partial kit versions ship with these header pins included but unsoldered, which allows the use of different gender connectors or wires to be soldered directly to the pads for lighter, more compact installations. A USB A to mini-B cable (not included) is required to connect this device to a computer. The Micro and Mini Maestros have 0.086″ diameter mounting holes that work with #2 and M2 screws.

          Main Features

          Micro Maestro 6-channel USB servo controller (fully assembled) controlling three servos.
          • Three control methods: USB, TTL (5V) serial, and internal scripting
          • 0.25μs output pulse width resolution (corresponds to approximately 0.025° for a typical servo, which is beyond what the servo could resolve)
          • Pulse rate configurable from 1 to 333 Hz (2)
          • Wide pulse range of 64 to 4080 μs (2)
          • Individual speed and acceleration control for each channel
          • Channels can be optionally configured to go to a specified position or turn off on startup or error
          • Alternate channel functions allow the channels to be used as:
            • General-purpose digital outputs (0 or 5 V)
            • Analog or digital inputs (channels 0 – 11 can be analog inputs; channels 12+ can be digital inputs)
            • One channel can be a PWM output with frequency from 2.93 kHz to 12 MHz and up to 10 bits of resolution
          • A simple scripting language lets you program the controller to perform complex actions even after its USB and serial connections are removed
          • Comprehensive user’s guide

          The Channel Settings tab in the Maestro Control Center.

          • Free configuration and control application for Windows and Linux makes it easy to:
            • Configure and test your controller
            • Create, run, and save sequences of servo movements for animatronics and walking robots
            • Write, step through, and run scripts stored in the servo controller
          • Two ways to write software to control the Maestro from a PC:
            • Virtual COM port makes it easy to send serial commands from any development environment that supports serial communication
            • Pololu USB Software Development Kit allows use of more advanced native USB commands and includes example code in C#, Visual Basic .NET, and Visual C++
          • TTL serial features:
            • Supports 300 – 200,000 bps in fixed-baud mode, 300 – 115,200 bps in autodetect-baud mode (2)
            • Simultaneously supports the Pololu protocol, which gives access to advanced functionality, and the simpler Scott Edwards MiniSSC II protocol (there is no need to configure the device for a particular protocol mode)
            • Can be daisy-chained with other Pololu servo and motor controllers using a single serial transmit line
            • Chain input allows reception of data from multiple Mini Maestros using a single serial receive line without extra components (does not apply to Micro Maestros)
            • Can function as a general-purpose USB-to-TTL serial adapter for projects controlled from a PC
          • Our Maestro Arduino library makes it easier to get started controlling a Maestro from an Arduino or compatible boards like our A-Stars
          • Board can be powered off of USB or a 5 – 16 V battery, and it makes the regulated 5V available to the user
          • Upgradable firmware

          Maestro Comparison Table

          Micro MaestroMini Maestro 12Mini Maestro 18Mini Maestro 24
          Channels:6121824
          Analog input channels:6121212
          Digital input channels:00612
          Width:0.85" (2.16 cm)1.10" (2.79 cm)1.10" (2.79 cm)1.10" (2.79 cm)
          Length:1.20" (3.05 cm)1.42" (3.61 cm)1.80" (4.57 cm)2.30" (5.84 cm)
          Weight(1):3.0 g4.2 g4.9 g6.0 g
          Configurable pulse rate(2):33–100 Hz1–333 Hz1–333 Hz1–333 Hz
          Pulse range(2):64–3280 μs64–4080 μs64–4080 μs64–4080 μs
          Script size(3):1 KB8 KB8 KB8 KB

          1 This is the weight of the board without header pins or terminal blocks.
          2 The available pulse rate and range depend on each other and factors such as baud rate and number of channels used. See the Maestro User’s Guide for details.
          3 The user script system is more powerful on the Mini Maestro than on the Micro Maestro. See See the Maestro User’s Guide for details.

          The Micro and Mini Maestros are available with through-hole connectors preinstalled or as partial kits, with the through-hole connectors included but not soldered in. The preassembled versions are appropriate for those who want to be able to use the product without having to solder anything or who are happy with the default connector configuration, while the partial kit versions enable the installation of custom connectors, such as right-angle headers that allow servos to be plugged in from the side rather than the top, or colored header pins that make it easier to tell which way to plug in the servo cables. The following picture shows an example of a partial-kit version of the 24-channel Mini Maestro assembled with colored male header pins:


          24-channel Mini Maestro (partial kit version) assembled with colored male header pins.

          Application Examples and Videos


          Micro Maestro as the brains of a tiny hexapod robot.

          • Serial servo controller for multi-servo projects (e.g. robot arms, animatronics, fun-house displays) based on microcontroller boards such as the BASIC Stamp, Orangutan robot controllers, or Arduino platforms
          • Computer-based servo control over USB port
          • Computer interface for sensors and other electronics:
          • General I/O expansion for microcontroller projects
          • Programmable, self-contained Halloween or Christmas display controller that responds to sensors
          • Self-contained servo tester


          An example setup using a Micro Maestro to control a ShiftBar and Satellite LED Module is shown in the picture below and one of the videos above. Maestro source code to control a ShiftBar or ShiftBrite is available in the Example scripts section of the Maestro User’s guide.


          Connecting the Micro Maestro to a chain of ShiftBars. A single 12V supply powers all of the devices.

          Dimensions

          Size:1.10" x 1.80"
          Weight:4.9 g1

          General specifications

          Channels:18
          Baud:300 - 200000 bps2
          Minimum operating voltage:5 V
          Maximum operating voltage:16 V
          Supply current:40 mA3
          Partial kit?:Y

          Notes:

          1
          Without header pins installed.
          2
          Autodetect works from 300 - 115200 bps.
          3
          With USB disconnected and all LEDs on. Connecting USB draws around 10 mA more.

          Documentation and other information

          Pololu Maestro Servo Controller User’s Guide (Printable PDF)

          User’s guide for the Pololu Micro Maestro 6-channel USB Servo Controller and the Pololu Mini Maestro 12-, 18-, and 24-Channel USB Servo Controllers.

          Pololu USB Software Development Kit

          The Pololu USB SDK contains example code for making your own applications that use native USB to control the Jrk Motor Controller, Maestro Servo Controller, Simple Motor Controller, or USB AVR Programmer.

          Sample Project: Simple Hexapod Walker (Printable PDF)

          This is a step-by-step tutorial showing you how to use the Pololu Micro Maestro to build a simple six-legged walking robot. The total parts cost is about $72.

          Application Note: Using AutoHotkey with Pololu USB Products (Printable PDF)

          An application note about using AutoHotkey for Windows to control Pololu USB products.


          File downloads

          Maestro Servo Controller Windows Drivers and Software (release 130422) (5MB zip)
          This ZIP archive contains the installation files for the Maestro Control Center, the Maestro command-line utility (UscCmd), and the Maestro drivers for Microsoft Windows.
          Maestro Servo Controller Linux Software (release 150116) (124k gz)
          This tar/gzip archive contains the binary executable files for the Maestro Control Center and the Maestro command-line utility (UscCmd) for Linux.
          Pololu Maestro guia de usuario (1MB pdf)
          A Spanish version of the user’s guide for the Pololu Micro Maestro 6-channel USB Servo Controller and the Pololu Mini Maestro 12-, 18-, and 24-Channel USB Servo Controllers, provided by customer Jaume B.
          Dimension diagram of the Mini Maestro 12-Channel USB Servo Controller (244k pdf)
          Mini Maestro 12-Channel USB Servo Controller drill guide (52k dxf)
          This DXF drawing shows the locations of all of the board’s holes.
          3D model of the Mini Maestro 12-Channel USB Servo Controller (11MB step)
          Dimension diagram of the Mini Maestro 18-Channel USB Servo Controller (222k pdf)
          Mini Maestro 18-Channel USB Servo Controller drill guide (64k dxf)
          This DXF drawing shows the locations of all of the board’s holes.
          3D model of the Mini Maestro 18-Channel USB Servo Controller (13MB step)
          Dimension diagram of the Mini Maestro 24-Channel USB Servo Controller (249k pdf)
          Mini Maestro 24-Channel USB Servo Controller drill guide (81k dxf)
          This DXF drawing shows the locations of all of the board’s holes.
          3D model of the Mini Maestro 24-Channel USB Servo Controller (15MB step)
          Maestro Movement Calculator (7k html)
          This program estimates how long the Maestro will take to perform a servo movement based on the configured speed and acceleration limits for the servo. It is packaged as an HTML file that you can run by downloading and then opening in any modern web browser.





          1. 소비자상담센터 : 02-2283-1300 

          2. 상품준비 및 배송기간안내
           
              상품 출고(배송) 준비기간 
                  a. 국내상품 : 
                       1) 해당상품 : 아이콘이 부착된 상품 
                       2) 입금 확인 후 최소 0일~최대 3일(단, 품절상품 제외) 

                  b. 해외상품 :

                       1) 해당상품: 아이콘이 부착된 상품 

                       2) 구매금액 700,000원 이상 : 입금확인 후 최소 5일 ~ 최대 2주 

                       3) 구매금액 700,000원 이하 : 입금확인 후 최소 1주 ~ 최대 8주 

                       4) 단, 해외계약업체에 품절되지 않은 상품에 한함 

             ② 구매상품 종류가 많을 경우 예상 준비기간 보다 더 소요 될 수 있습니다. 

             ③ 주문하신 상품은 출고완료 메일 또는 문자 수신 후 익일~최대7일(도서,산간지역) 

                이내에 수령하실 수 있습니다. 

             ④ 제주(\3,500원)/도서지역(\5,000원)은 배송비가 추가됩니다. 

                제주,도서, 산간지역은 타 지역보다 배송기간이 길어질 수 있습니다. 

             ⑤  아이콘이 부착된 상품이라도 국내재고가 있을 수 있습니다. 

             ⑥ 해외 현지 사정으로 인해 공지한 배송기간보다 더 길어 질 수 있습니다. 

             ⑦ 해외상품은 반품/교환/취소가 어려울 수 있으니 신중히 주문하시기 바랍니다.

           

          3. 소비자의 단순변심/착오구매에 의한 청약철회제한안내 


              전자상거래 등에서의 소비자보호에 관한 법률 제17조 제2항 및 동 시행령 

                제21조에 의한 청약철회 제한 사유에 해당하는 경우 및 기타 객관적으로 

                이에 준하는 것으로 인정되는 경우에 한합니다. 

             ② 소비자의 단순변심, 착오구매에 의한 교환/반품 시에 발생하는 배송비는 

                소비자가 부담합니다. 

             ③ 판매자의 실수,제품하자 등의 사유로 인한 배송비는 판매자가 부담합니다.

           

          4. 상품의 교환/반품/보증조건 및 품질보증기준안내

           

              상품이 공급된 날(배송완료일)로부터 7일 이내에 교환/반품을 신청 할 수 있습니다. 

                그러나 아래의 사유에 해당 하는 경우에는 교환/반품 신청이 받아들여지지 않을 수도 있습니다. 

                  a. 소비자의 책임으로 인해 상품이 훼손/멸실 된 경우(확인을 위한 포장훼손제외) 

                  b. 소비자의 사용에 의해 상품의 가치가 현저하게 감소한 경우 

                  c. 시간의 경과로 인해 상품의 재판매가 불가하게 된 경우 

                  d. 판매방식의 특성으로 판매자에게 회복할 수 없는 피해가 발생한 경우 (주문제작 상품, 청약철회상품 등) 

             ② 교환/반품/보증조건 및 품질보증기준은 『소비자기본법』에 따른 소비자분쟁해결기준에 따라 피해를 보상합니다.

           

          5. 소비자피해보상 처리, 재화 등에 대한 불만 및 분쟁처리 안내

           

             ① 본 상품은 소비자 분쟁해결기준(공정거래위원회 고시)에 따라 피해를 보상받을 수 있습니다.


          관련상품

            • 아두이노 우노 R3 초보자 키트 스텝 1
            • 아두이노 실습을 위한 필수 부품이 포함된 키트, 특히 아두이노 코딩 배우기 교재를 따로 구매 하실 수 있는 제품입니다.
            • 판매가 ₩ 24,200
            • 페이지뷰 8,323
              • 조건부 무료배송
            • 라즈베리파이 고급 키트
            • 다양한 입출력-센서-디스플레이-통신-인터페이스 모듈 및 기타 액세서리로 구성된 울티메이트 라즈베리파이 키트
            • 판매가 ₩ 99,000
            • 페이지뷰 1,461
              • 조건부 무료배송
            • 아두이노 메가 2560 고급 키트
            • 아두이노 우노 R3보다 많은 입출력포트 확보가 가능하여 다양한 확장모듈 연동이 가능한 키트로 번거로운 케이블 연결을 최소화한 전문엔지니어를 위한 메가2560기반 아두이노 고급 키트
            • 판매가 ₩ 132,000
            • 페이지뷰 9,999+
              • 조건부 무료배송

          판매자 관련상품

          판매자 정보

          판매자 정보
          판매자 본사  셀러등급
          상호명 (주)위키모바일(로봇사이언스몰) 대표자 김경식
          사업자등록번호 215-87-14086 통신판매신고번호 제2008-서울송파-0867호
          연락처 02-2283-1300 사업장 소재지 서울특별시 송파구 문정동 643-1 엠스테이트 B동704호
          1. 주문하신 물품의 총 결제금액이 15만원 이상 (환율의 변동에 따라 다를 수 있음) 이면 과부가세가 발생합니다. 관부가세는 고객님께서 부담하시는 금액으로 문자를 통해 입금내역이 발송되며 해당 관세사로 입금하시면 통관처리됩니다.

          2. 해외구매 특성상 주문에서 배송까지는 평균 10~15일이 소요됩니다. 간혹 현지 제품 수급에 따라 부득이하게 시일이 더 소요 될 수 있으니 구매시 좀 더 여유있게 주문하시길 권합니다.

          3. 해외 내수품인 관계로 A/S에 대해서는 별도의 책임을 지지 않습니다.

          4. 해외배송 특성상 주문접수후 배송상태가 배송준비중으로 넘어간 경우 해외에서 국내로의 배송이 이루어지고 있다는 뜻입니다. 따라서 배송준비중으로 배송상태가 넘어간 경우 취소및 반품이 불가하므로 이점 양해 부탁드립니다.

          5. 타 해외구매대행 사이트에서 주문하신 물건과 주문날짜가 겹치지않도록 주의해 주십시오. 통관날짜가 같을 경우 합산관세가 부가되게 됩니다.
          [고객센터]
          전화 : 02-2283-1300
          팩스 : 02-2283-1304
          메일 : ask@wikimobile.co.kr
          [업무시간안내]
          -전화(채팅)상담 10:00~17:00
          -점심시간 12:30~13:40
          -토,일요일,공휴일휴무
          [계좌 예금주:(주)위키모바일]
          * 국민은행 989801-00-039436
          * 농협중앙회 317-0003-2692-21
          * 우리은행 1005-203-780214
          * 기업은행 02-2283-1300
          1.코딩N메이커[Coding&Maker]
          ARDUINO
          ADAFRUIT
          SPARKFUN
          POLOLU
          Elecfreaks
          DFRobot
          MakeBlock
          BareConductive
          KITRONIK
          PIMORONI
          SALEAE
          ASUS
          ScienceBox
          Chibitronics
          Firmtech
          ZEROPLUS
          RoboRobo
          ETboard
          카미봇
          코코아팹
          팀보로봇
          쇼핑몰이용안내
          notice qna
          goods_review 입금자찾기
          faq 쇼핑몰활용 Tips
          동영상라이브러리 골드버그장치
          자료실
          전자계약사이트
          학교장터
          나라장터
          연구원카드결제
          회사명 : (주)위키모바일(로봇사이언스몰) | 사업자등록번호 : 215-87-14086 [사업자정보확인] | 주소 : 서울특별시 송파구 법원로 114 엠스테이트 B동704호
          통신판매업 신고 : 제2008-서울송파-0867호 | 연락처 : 02-2283-1300 | FAX : 02-2283-1304 | 개인정보보호 책임자 : 김 경식 | 대표자 : 김경식
          호스팅사업자 : 가비아 퍼스트몰 | contact : ask@wikimobile.co.kr for more information
          *로봇사이언스몰의 콘텐츠 저작권은 (주)위키모바일에 있으며 무단·전재·복사 배포를 금합니다.
          회원님의 소중한 개인정보 보호를 위해 비밀번호를 주기적으로 변경하시는 것이 좋습니다.
          현재 비밀번호
          신규 비밀번호
          신규 비밀번호 확인
          비밀번호는 영문 대문자, 영문 소문자, 숫자, 특수문자 중 2가지 이상을 조합한 8~20자